Driver for Actuator
Turn any 12 V linear actuator into a puzzle-driven “thing that moves”. A statue rises, a wall slides, a curtain pulls.

Watch It Drive
Wire any 12 V actuator with limit switch — this little box handles the rest.
Video Manual
Short Videos
How it all connects
See how our products work together to create a complete escape room puzzle.
Smart Sensor
Detects InputRFID, buttons, magnets, light & more
2Sensor Extension
Special EffectsLED animations, multiple solutions & more
3Puzzle Controller
Processes LogicProcesses signals & triggers outputs
Output Set
Effects & ActionsMaglocks, lights, sounds & more
Puzzle Ready!
Complete SetupYour escape room puzzle is good to go
Driver for Actuator Features
The brain that turns a generic actuator into a puzzle-driven output.

Lift, slide, rotate — anything mechanical
Linear actuators are the workhorse of escape-room “big moves”: rising statues, sliding walls, sinking pedestals. The Driver for Actuator translates a puzzle-solved signal into the actuator’s forward / reverse motion.

Two directions, one signal
While the puzzle is unsolved, the actuator drives one way. Solve the puzzle, it drives the other way. Reversing the direction is as simple as swapping two wires — no programming, no special hardware.

Use your own actuator
Bring any 12 V linear actuator with a built-in limit switch (max 5 A). We don’t lock you to a specific model — pick the stroke, force and speed that fit your prop.

Built for the ecosystem
Ethernet cable to the Ultimate Universal puzzle controller, screw terminals for your actuator and its PSU. The Driver becomes another solved-state effect in your puzzle chain — no code, no special wiring.
Everything In the Box
The driver plus the Ethernet cable. Bring your own actuator and 12 V PSU.
Driver for ActuatorEthernet port + screw terminals + optional relay terminal
Easily replaced with longer cable
Puzzle Ideas with the Driver for Actuator
Three quick concepts to spark your own.
Rising statue
Mount a linear actuator vertically inside a plywood plinth. When the final puzzle is solved, the statue (or relic, or skull) rises out of the column — ready to be the team’s victory photo prop.
Secret sliding wall
Drive a horizontal actuator behind a fake wall section. Solve the right puzzle, the section slides aside and reveals the next room. Players literally watch a wall move.
Curtain reveal
Wire an actuator to pull a curtain across a window, screen, or stage. The mood changes the instant the puzzle is solved — from blackout to dramatic reveal.
Technical Specifications

Package Contents
- Driver for Actuator (Ethernet port, screw terminals, optional relay + power port)
- 1 m Ethernet cable
- (Power supply NOT included — bring one that matches your actuator)
| Dimensions | 145 × 90 × 45 mm |
|---|---|
| Weight | 0.3 kg |
| Max actuator voltage | 12 V |
| Max actuator current | 5 A |
| Actuator requirement | Must have a built-in limit switch |
| Direction control | Default forward when unsolved, reverse when solved — swap wires to invert |
| Multiple actuators | Yes, as long as PSU can supply combined current |
| Compatible controller | Ultimate Universal puzzle controller or any controller which has a relay output (via relay screw terminal) |
Tip: Pick an actuator with a slightly slower speed (10–15 mm/s) for theatrical reveals — the slow motion gives players time to react and creates the cinematic moment.
Driver for Actuator Manual
Wiring, actuator selection, direction reversal, multi-actuator setups and FAQs.
📖 Open Full ManualHow to Set It Up
No programming required.

Strip the actuator cable wires and secure them into the Driver’s “actuator” screw terminal. Wire order determines direction — if it moves the wrong way, swap the two wires.

Strip the actuator power supply wires and secure them into the Driver’s “actuator’s power supply” terminal, matching the + and − markings.

Connect the Driver to the Ultimate Universal puzzle controller via the included Ethernet cable. Power the controller and the actuator independently.

While the puzzle is unsolved, the actuator drives one direction (to its limit). Once it’s solved, it drives the other way.
Frequently Asked Questions
How do I change which direction is the “solved” direction?
Go back to step 1 and swap the two actuator wires in the screw terminal. The Driver itself doesn’t care about direction — it just sends current one way or the other.
How do I make the actuator stop at a specific point?
Use an actuator with a built-in limit switch — the actuator itself stops once the switch is triggered. The Driver doesn’t have a stop-at-position function on its own.
How many actuators can one Driver control?
Multiple, as long as your power supply can deliver enough current for all of them combined (and stays under the 5 A driver maximum).
Is a power supply included?
No — bring your own 12 V, max 5 A supply that matches the actuators you’re driving. Different actuators have different current draws.
Will it work with linear actuators only, or also rotary motors?
It’s designed for linear actuators with a limit switch. For continuous-rotation motors, use the Electric Motor output set instead.
How do output sets work?
Output sets are activated when the puzzle is solved, that is when the correct sensors are triggered just like it was set on the Ultimate Universal puzzle controller. Every output set has to be connected to the Universal via the Output relay module (included with every Ultimate Universal puzzle controller and output set at no additional cost).
How many output sets can one puzzle have?
One Ultimate Universal puzzle controller can have any number of output sets, and they will all be activated at once. You can mix several outputs to make multiple things happen at the same moment when the puzzle is solved.
I don’t know which output set I need for my puzzle idea.
No problem. Contact our customer support, describe your idea and we will help you pick the right products.
What is the length of the cable that connects an output set to a puzzle controller?
Each output set connects to the Ultimate Universal puzzle controller via an Ethernet cable. We provide a 1 m (3.28 ft) cable, but longer ones are easy to find and fully compatible.
Can I use my own output set?
Yes! If you already have e.g. an electromagnet, you can use it with our puzzle controller — all you need is an Output relay module (included with every Ultimate Universal puzzle controller). Just remember to provide an external power source for the output device.
More output sets to Explore
Other ways to land the wow on solve moment.

A complete column-with-actuator-built-in — if you want the easy version of the rising-statue puzzle.

For rotary motion (winches, spinning props) rather than linear motion.

Generic 12 V / 1.5 A output module for low-current custom devices.
Move whatever your room needs to move.
Plug it in, wire your actuator, watch the prop drive on cue.
🛒 Add to Cart















Josh Green (verified owner) –
This device is great. Connects to a power supply, then to the actuator as well as your house unit for RFID’s or whatever you’d using to activate it. and BAM, your actuator moves, which is great. It’s a great price and very helpful staff for getting the right stuff.