Electric Motor output set
Something has to spin, pull, or lower. This is the motor that does it — on cue.

Watch It Spin
100 RPM, 34 kg·cm torque, on-solve activation. Plenty of force for fishing reels, drawbridges, lowering rigs.
Video Manual
Short Videos
How it all connects
See how our products work together to create a complete escape room puzzle.
Smart Sensor
Detects InputRFID, buttons, magnets, light & more
2Sensor Extension
Special EffectsLED animations, multiple solutions & more
3Puzzle Controller
Processes LogicProcesses signals & triggers outputs
Output Set
Effects & ActionsMaglocks, lights, sounds & more
Puzzle Ready!
Complete SetupYour escape room puzzle is good to go
Electric Motor output set Features
The cleanest way to add rotational motion to your room.

Spin anything on solve
When the puzzle is solved, the motor starts spinning. Wire a fishing reel to lower a fake spider from the ceiling. Wire a winch to lift a drawbridge. Wire a spool to pull back a curtain. Real mechanical motion, no programming.

Serious torque
34 kg·cm of torque is enough to drive realistic-scale escape-room reveals: lift moderate props, retract curtains, winch lightweight gear. The 5 mm shaft fits standard pulley and coupling kits.

Run as long as you need
By default it spins for as long as the puzzle stays solved. Or use the included USB drive (Ultimate Universal puzzle controller) to program a fixed duration — “spin for 4 seconds, then stop”.

Built for the ecosystem
Green screw terminal into the Output relay module, Output relay module into the Ultimate Universal puzzle controller. No firmware, no coding — the motor just becomes another solved-state effect.
Everything In the Box
Motor + relay + PSU. Pulley / winch / reel hardware not included — pick what fits your prop.
Electric motor100 RPM · 34 kg·cm torque · 5 mm shaft
Bridges motor to Universal controller
EU/US/UK plug per shipping region
Puzzle Ideas with the Electric Motor
Three quick concepts to spark your own.
Lowering spider
Spool a thin cable on the motor shaft, route it through a pulley on the ceiling, attach a fake spider. Solve the horror puzzle — the spider drops on the team. Set the spin duration via USB to control exactly how far it falls.
Fishing reel finale
Mount the motor as a hidden fishing-reel mechanism. When the angler puzzle is solved, the motor reels in the line — pulling a final clue out of a “lake” onto the deck.
Curtain retract
Wire the motor to a curtain rod with a small drum and string. Solve the right puzzle, the curtain pulls aside, the final reveal scene is exposed.
Technical Specifications

Package Contents
- Electric Motor with green-screw-terminal cable
- Output relay module
- Power supply (EU/US/UK plug)
| Motor speed | 100 RPM |
|---|---|
| Torque | 34 kg·cm |
| Motor size | 80 mm × 37 mm diameter |
| Shaft size | 5 mm diameter |
| Duration control | Continuous while solved, OR fixed via USB on Universal |
| Cable to controller | 1 m Ethernet (extendable) |
| Compatible controller | Ultimate Universal puzzle controller or any controller which has a relay output (via relay screw terminal) |
Tip: If your prop needs the motor to stop at a precise point (e.g. raise a flag to a specific height), use a linear actuator with limit switch + Driver for Actuator instead. The Electric Motor output set is for continuous rotation, not positional control.
Electric Motor output set Manual
Wiring, duration control via USB, pulley setup tips and FAQs.
📖 Open Full ManualHow to Set It Up
No programming required.

Connect the Electric Motor output set to the Ultimate Universal puzzle controller using the included output relay module and an Ethernet cable.

Connect the output set to its power supply. Then connect the Ultimate Universal puzzle controller to its own power supply.

While the puzzle is unsolved, the motor stays off. Once it’s solved, the motor starts spinning.
Frequently Asked Questions
How long does the motor spin after the puzzle is solved?
By default, as long as the controller stays in the solved state. To program a fixed duration (e.g. spin for 4 seconds then stop), use the USB drive included with the Ultimate Universal puzzle controller.
Can it spin in both directions?
It spins in a single direction by default. To swap direction, swap the wires in the green screw terminal. For switching direction on a puzzle event, use the Driver for Actuator instead.
How much weight can it pull?
34 kg·cm of torque, which with a small pulley translates to a few kilos of lifting force. Enough for fake spiders, light curtains, fishing-reel props — not enough for moving people or heavy furniture.
Is the motor noisy?
Audible — it’s a small electric motor under load. Place it inside a hidden cavity or behind soundproofing for stealthy reveals; embrace the sound for mechanical / steampunk themes.
Can I run multiple motors from one output relay?
One motor per output relay is recommended — the relay’s current rating matches a single motor. For multiple synchronized motors, use multiple output relays driven by the same puzzle output.
How do output sets work?
Output sets are activated when the puzzle is solved, that is when the correct sensors are triggered just like it was set on the Ultimate Universal puzzle controller. Every output set has to be connected to the Universal via the Output relay module (included with every Ultimate Universal puzzle controller and output set at no additional cost).
How many output sets can one puzzle have?
One Ultimate Universal puzzle controller can have any number of output sets, and they will all be activated at once. You can mix several outputs to make multiple things happen at the same moment when the puzzle is solved.
I don’t know which output set I need for my puzzle idea.
No problem. Contact our customer support, describe your idea and we will help you pick the right products.
What is the length of the cable that connects an output set to a puzzle controller?
Each output set connects to the Ultimate Universal puzzle controller via an Ethernet cable. We provide a 1 m (3.28 ft) cable, but longer ones are easy to find and fully compatible.
Can I use my own output set?
Yes! If you already have e.g. an electromagnet, you can use it with our puzzle controller — all you need is an Output relay module (included with every Ultimate Universal puzzle controller). Just remember to provide an external power source for the output device.
More output sets to Explore
Other ways to land the wow on solve moment.

For linear motion with positional control (limit switch) — rising statues, sliding walls.

For water flow rather than rotation — fountains, potions, lab effects.

For driving your own custom low-voltage motor with a programmable on/off sequence.
Make the room move on cue.
Plug it in, wire your prop, watch the puzzle drive real mechanical motion.
🛒 Add to Cart









Reviews
There are no reviews yet.