Multi RFID Sensor
Six RFID sensors in one device — trigger up to 6 different ports and pair up to 18 RFID items. Save space AND money.




See It in Action
Watch how to set up and use the Multi RFID sensor step by step
Product Videos
Short Videos
How It All Connects
See how our products work together to create a complete escape room puzzle
Puzzle Ready!
Complete Setup
Your escape room puzzle is good to go
Multi RFID Sensor Features

Six Sensors in One Place
The Multi RFID sensor is an expanded RFID sensor that can trigger 6 different ports — so it can be connected to up to 6 different Ultimate Universal puzzle controllers at the same time.
This way you have 6 different RFID sensors in one place — you save space AND money!

Pair 18 Items, Assign Them Freely
Teach the sensor up to 18 different RFID items with the teaching button. Then assign one or more items to each port of the Multi Solution module — and even assign the same RFID item to multiple ports at the same time.
That flexibility lets one device drive several puzzles, stages, or difficulty variants at once.

Works Hidden Under the Surface
Mount the sensor out of sight — it detects RFID items through plywood: 30 mm for an RFID card, 18 mm for a sticker, and 12 mm for a tag.
Note: like every RFID sensor, it does not work through metal surfaces.

Six Indicator LEDs Included
The set includes 6 indicator LEDs (status diodes) — one for each port — so you and your players can instantly see which port is triggered. Whenever the sensor detects a paired RFID item, the yellow diodes on its Ethernet ports light up too.
The maximum load of each feedback connector is 150 mA. If you need to connect something with a higher current load, add an external power supply — then the maximum load increases to 2A.
Whack-a-Mole & Simon Says
The Multi RFID sensor is not designed for Simon Says (Mode 6) or Whack-a-Mole (Mode 7). These game modes need monostable sensors that players trigger and release in rapid succession — while the Multi RFID sensor is built for placing and assigning RFID items across its six ports.
If you want RFID-based Mode 6 / Mode 7 gameplay, the standard RFID sensor is compatible with both modes.
Included Items
The Multi RFID sensor is a complete set — pick your RFID media on the product form above
RFID SensorDetects up to 18 paired RFID items
Multi Solution ModuleSplits the signal across 6 assignable ports
6 Indicator LEDsStatus diodes showing which port is triggered
Your Choice of RFID MediaTick 6 cards, 6 tags, or 6 stickers on the form
Inspiration for Your Room
Creative ways to use the Multi RFID sensor in escape room puzzles
Museum of Lost Relics
Six pedestals, six artifacts — each with a hidden RFID tag. Players must return every relic to its rightful pedestal; each correct placement triggers a different port and lights up part of the exhibit.
Alchemist’s Workbench
Tag potion ingredients with RFID stickers. Different recipes require different ingredients on the bench — each combination triggers different ports, unlocking different effects or clues.
War Room Map
Players deploy tagged figurines onto a strategy map. Placing the right unit in the right region triggers that region’s port — deploy all forces correctly to reveal the enemy’s plan.
Zodiac Altar
One enchanted talisman, several altars. Because the same RFID item can be assigned to multiple ports, the talisman works on every altar — but only the right sequence completes the ritual.
Technical Specifications

Package Contents
- ✓ RFID sensor
- ✓ Multi Solution module
- ✓ 6 indicator LEDs (status diodes)
- ✓ Your choice of RFID media: 6 cards, 6 tags, or 6 stickers
The RFID sensor does not work through metal surfaces.
| Trigger Ports | 6 (up to 6 different puzzle controllers) |
|---|---|
| Paired RFID Items | Up to 18 |
| Sensing Range | 30 mm card / 18 mm sticker / 12 mm tag (through plywood) |
| RFID Standard | 13.56 MHz — ISO14443A |
| Detection Modes | INSTANT / BALANCED / CLOSE (for sensors near each other) |
| Connection | Ethernet cables (RJ45) to puzzle controllers |
| Power | From the puzzle controller, or optional 12 V port |
| Feedback Output | Max 150 mA per connector (2A with external power) |
Multi RFID Sensor Manual
Find step-by-step instructions, port-assignment guides, detection-mode configuration, and troubleshooting tips in our comprehensive knowledge base.
Open Manual →How to Set It Up

Connect the RFID sensor to the Multi Solution module (“SENSOR” port). Then, connect the Multi Solution module to an Ultimate Universal puzzle controller.

Connect the Ultimate Universal puzzle controller to a power supply.

Place an RFID item on the sensor and hold the teaching button until the diode blinks once (approx. 1 sec). You can pair up to 18 different RFID items.

Whenever the sensor detects a paired RFID item, it becomes triggered and the yellow diodes on its Ethernet ports light up.

Place a paired RFID item on the sensor, then press the button next to a numbered port on the Multi Solution module to assign it. Each port can hold one or more items.

Resetting the Memory
To reset the RFID sensor’s memory, hold its teaching button for 10 seconds until the diode blinks a few times. Same for the Multi Solution module — hold its Teaching Button 1 for 10 seconds.

Optional Power Supply
Normally the set is powered by the puzzle controller it is connected to. To use it without a controller, use the 12 V port marked “Optional power supply”.
Frequently Asked Questions
Does the Multi RFID sensor work through metal surfaces?
No — like every RFID sensor, it does not work through metal. It does work through plywood: 30 mm for an RFID card, 18 mm for a sticker, and 12 mm for a tag.
Can one RFID item trigger more than one port?
Yes. Each Multi Solution module port can have multiple RFID items assigned to it — and you can assign the same RFID item to multiple ports at the same time.
What are the detection modes for?
If you use several RFID sensors close to each other, you can switch between INSTANT (default, sensors above 10 cm apart), BALANCED (7–10 cm apart), and CLOSE (right next to each other) modes. Changing the mode does not affect the sensing range — for most cases the default INSTANT mode is completely sufficient.
How many sensors can one puzzle have?
Our hardware lets you attach up to 14 sensors to one puzzle controller (one puzzle). You can use many sensors of the same kind, or make each of them of a different kind — it all depends on your puzzle idea.
What is the length of the cable that connects a sensor to a puzzle controller?
Each sensor is connected to the Universal puzzle controller via an Ethernet cable. We provide a 1 m (3.28 ft) cable but you can easily get longer ones.
Can your sensors be wireless?
From our experience, wireless technology is not reliable enough to be used in escape room puzzles. With cables, you can be sure that triggering a sensor will be detected by the puzzle controller and won’t ruin the experience.
Does the Multi RFID sensor require separate power?
Normally, the set is powered by the Ultimate Universal puzzle controller it is connected to. If you want to use it without a controller, you can use the 12 V port marked “Optional power supply”.
Six Puzzles. One Sensor.
Pick your RFID media — 6 cards, 6 tags, or 6 stickers — on the product form and build your Multi RFID set.
Build Your Multi RFID Set












Reviews
There are no reviews yet.