The ZigBee brain.
Bring your own devices.
The Remote Power module alone — a ZigBee 3.0 coordinator that mirrors a puzzle controller port to up to 8 wireless devices. No smart plug included: pair the sockets, bulbs, relays or USB switches you already own.


Just the module. On purpose.
This is the Remote Power output set without the smart plug — for builders who already own ZigBee 3.0 devices, or who already have our ZigBee smart plug and need a second module for another puzzle.
Connects to any Ultimate Universal puzzle controller port with a standard Ethernet cable — and powers itself from that port.

One button. Full control.
Short press — toggle every paired device: testing, resets, game-master overrides. Hold 5 seconds — open pairing for a new device. Hold 10 seconds — unpair everything.
The NC/NO jumper flips the logic: devices on when the puzzle is solved — or on until it’s solved.
Control from your browser.
Every Remote Power module gets its own page in the controller’s web interface. Name each device, mark RGB bulbs and pick their colour, test, pair and unpair — without touching the hardware.

What will you pair?
One coordinator, up to 8 ZigBee 3.0 devices — mix and match per room.
Switch anything that plugs into a wall outlet, up to 3680 W — lamps, screens, fog machines. Our ZigBee smart plug is the tested match.
Pick a colour per bulb in the web interface — the whole scene shifts the moment the puzzle is solved.
Light a hidden compartment or a map contour in the chosen colour.
Switch maglocks, motors or 12 V props directly. Multi-channel relays are not supported.
Spin up fans, mist makers or LED decorations powered from any USB port.
Most standard ZigBee 3.0 sockets pair fine. Full compatibility list in the manual.
Module only — or the full set?
If you don’t own any ZigBee devices yet, the complete set with a factory-paired smart plug is the easiest start.
Complete set Remote Power output set Module + ZigBee smart plug, factory-paired and ready to go, plus the Ethernet cable. View the set →
Module only Remote Power output set (unit only) The ZigBee coordinator module alone — pair it with devices you already own.
Add a plug ZigBee smart plug The tested match for this module — EU, US and UK versions. Add up to 8 per module. View the plug → Specifications
- Radio
- ZigBee 3.0 (coordinator)
- Paired devices
- Up to 8, switched together
- Module power
- From the controller port — no extra supply
- Mode
- NO / NC via jumper
- Configuration
- Web interface (controller software SW6+)
- Compatible controller
- Ultimate Universal puzzle controller, or any controller with a relay output
- Connection
- Standard Ethernet cable to any controller port
- In the box
- Remote Power module (ZigBee coordinator) — no smart plug
See it fire.
Running in minutes.
01Connect the Remote Power output set to the Ultimate Universal puzzle controller using the included Ethernet cable.
02Make sure that the little black jumper connects the NC or NO pins, depending on your puzzle idea.
NO – paired devices are active when the puzzle is solved;
NC – paired devices are active when the puzzle is not solved.
03Plug the smart plug into your power outlet (use a power plug adapter if needed). Plug in the device you want to control with the Remote Power output set.
04Connect the Ultimate Universal puzzle controller to a power supply. The Remote Power output set itself doesn’t need a power supply — it is powered from the controller port. (The OPTIONAL POWER 12V terminal is only for stand-alone use without a controller.)
05Successful pairing is confirmed by the info diode blinking three times. From now on, changing the controller port state activates/deactivates all paired devices (according to the NC/NO jumper). You can also short-press the TEACHING BUTTON to toggle them manually at any moment.
06 · PAIRINGHold the TEACHING BUTTON for about 5 seconds — the info diode starts blinking and the ZigBee network opens for joining for 180 seconds. Keep the plug close to the module during pairing.
Repeat the procedure for every additional device (up to 8 in total).
To unpair all devices, hold the TEACHING BUTTON for 10 seconds.
Questions, answered.
What’s the difference between this and the full Remote Power output set?
Which ZigBee devices are compatible?
How do I pair a device?
Can it switch multiple devices at once?
Can it control RGB smart bulbs?
Does it need its own power supply?
Do I need anything special for the web interface?
How far does the wireless signal reach?
Is a cable included?
Everything, documented.
Wiring, NC/NO jumper, pairing ZigBee devices, web interface configuration, compatible devices and troubleshooting.
How it all connects
See how our products work together to create a complete escape room puzzle.
Smart Sensor
Detects InputRFID, buttons, magnets, light & more
2Sensor Extension
Special EffectsLED animations, multiple solutions & more
3Puzzle Controller
Processes LogicProcesses signals & triggers outputs
Output Set
Effects & ActionsMaglocks, lights, sounds & more
Puzzle Ready!
Complete SetupYour escape room puzzle is good to go
More to explore.
Remote Power output set (unit only)
The ZigBee coordinator alone — pair it with the devices you already own.



Power output set






Reviews
There are no reviews yet.