Steering Wheel Sensor
Spin your way to success — a versatile steering wheel for ships, cars and anything you can think of. Durable, stylish, and precise for the most immersive puzzle ideas.




See It in Action
Watch how to set up and use the Steering Wheel sensor step by step
Short Videos
How It All Connects
See how our products work together to create a complete escape room puzzle
Puzzle Ready!
Complete Setup
Your escape room puzzle is good to go
Steering Wheel Sensor Features
Turn the Wheel, Crack the Code
The sensor registers full rotations to the right or left — and you can create a sequence of up to 20 turns in any combination of directions.
The starting position of the wheel does not matter. Once players start turning, the sensor waits for the complete sequence of full turns and becomes triggered the moment it is recreated correctly.

Set the Scene — Ship, Car or Machine
Create a puzzle in a ship captain’s cabin where players find a large steering wheel and a map. They have to understand the captain’s notes and make 3 full turns to the left, then 5 to the right, and another 2 to the left to solve the puzzle.
The sensor comes in a wooden case that mounts easily to a wall, with a wooden wheel hub assembly — attach our wooden steering wheel add-on or build your own custom wheel on top of it.

One Device — 5 Different Sensors
This universal encoder device can become 5 different sensors. Move the small black jumper to another pair of gold pins and reconnect the power — the Steering Wheel sensor uses MODE 2.
The same hardware also powers the Direction sensor, Safecracker sensor, Valve sensor and Handwheel sensor.

Add an Indication Light or Output
The Steering Wheel sensor supports an optional indication output that provides visual feedback when the sensor is triggered — connect a small LED or indicator to the feedback connector to show players their sequence was correct.
The maximum load of the feedback connector is 150 mA. If you need to connect something with a higher current load, add an external power supply — then the maximum load increases to 2A.
Whack-a-Mole & Simon Says

Not Compatible with These Game Modes
The Steering Wheel sensor is not compatible with Simon Says (Mode 6) and Whack-a-Mole (Mode 7). These game modes need monostable sensors that players can trigger and release in a split second — the Steering Wheel is solved by recreating a whole sequence of full turns, which doesn’t fit that rapid trigger-and-release gameplay.
Looking for sensors made for these modes? Try the LED Button sensor, Foot Button sensor or Hands and Body sensor.
Included Items
Steering Wheel SensorIn a wooden case that mounts easily to a wall
Wooden Wheel Hub AssemblyAttach our add-on or your own custom wheel
Wooden Steering Wheel Add-OnOptional 740 mm wheel, ready to install
1-Meter Ethernet CableFor connecting to the puzzle controller
Inspiration for Your Room
Creative ways to use the Steering Wheel sensor in escape room puzzles
Captain’s Cabin
Players find a large steering wheel and a map with the captain’s notes. Decode the notes, then make 3 full turns left, 5 right and 2 left to change the ship’s course and unlock the treasure hold.
Getaway Garage
Mount the sensor behind a car dashboard prop. Players must “steer” the getaway route from a memorized map — the right sequence of turns starts the engine sound and opens the garage door.
Submarine Dive
Combine the wheel with gauges and valve props. Turning the helm in the correct pattern levels the submarine and triggers a rumbling dive effect through an output set.
Time Machine Helm
Make the wheel the centerpiece of a time machine. Each era on the dial requires a different number of full turns — get the whole sequence right to “travel” and reveal the next scene.
Technical Specifications

Package Contents
- ✓ Steering Wheel sensor in a wooden, wall-mountable case
- ✓ Wooden wheel hub assembly
- ✓ Optional wooden add-on — steering wheel
- ✓ 1-meter Ethernet cable
| Sequence Length | Up to 20 full turns, any directions |
|---|---|
| Starting Position | Irrelevant — sensor waits for the full sequence |
| Margin for Error | Adjustable 1°–20° (rear potentiometer) |
| Auto-Reset | On by default (resets 5 s after solving); can be turned off |
| Wheel Hub Dimensions | 85 × 85 × 12 mm (approx. 3.3 × 3.3 × 0.5 in) |
| Sensor Weight | 0.7 kg (1.5 lbs) |
| Wheel Add-On | 740 × 740 × 30 mm (approx. 29.1 × 29.1 × 1.9 in), 1.4 kg (2.2 lbs) |
| Connection | Ethernet cable (RJ45) to puzzle controller |
| Feedback Output | Max 150 mA (2A with external power) |
Steering Wheel Sensor Manual
Find step-by-step instructions, mode-jumper settings, auto-reset configuration, and troubleshooting tips in our comprehensive knowledge base.
Open Manual →How to Set It Up

Connect the Steering Wheel sensor to the Ultimate Universal puzzle controller via the included Ethernet cable. Make sure the small jumper is set to MODE 2.

Connect the Ultimate Universal puzzle controller to a power supply.

Attach any add-on — ours or a custom one — via the wooden hub assembly.

Hold the teaching button until its red diode starts blinking, then teach the sensor the correct sequence of full turns. After each registered turn, the blinking diode freezes for a moment.

Create a sequence of full turns (e.g. 2 right, 3 left) — up to 20 turns in any direction — and press the teaching button to save it. Whenever the sequence is recreated, the sensor triggers and the yellow diodes on its Ethernet ports light up.

Margin for error: use a screwdriver on the rear potentiometer to set how precise a full rotation must be — fully left gives a 1-degree tolerance, fully right allows up to 20 degrees.
Setting the Auto-Reset Mode
By default, the sensor automatically resets 5 seconds after being solved. To change this, hold the teaching button until the diode shows: 2 blinks — auto-reset off (stays triggered until the wheel is turned again) · 3 blinks — auto-reset on (resets after 5 seconds).
Frequently Asked Questions
Can I attach my own steering wheel?
Yes. The package includes a wooden wheel hub assembly — attach our optional wooden steering wheel add-on, or mount any custom wheel that fits your room’s theme.
What if players don’t turn the wheel precisely?
You decide how forgiving the wheel is. The rear potentiometer adjusts the margin for error from a strict 1-degree tolerance up to a relaxed 20 degrees per full rotation.
How do sensors work?
Sensors detect what players do. When a player performs a specific action, the sensor identifies that action and becomes triggered. When all the sensors connected to a puzzle controller are triggered correctly (in a specific way and/or order), the puzzle is solved and the output sets activate.
How many sensors can one puzzle have?
Our hardware lets you attach up to 14 sensors to one puzzle controller (one puzzle). You can use many sensors of the same kind, or make each of them of a different kind — it all depends on your puzzle idea.
What is the length of the cable that connects a sensor to a puzzle controller?
Each sensor is connected to the Universal puzzle controller via an Ethernet cable. We provide a 1 m (3.28 ft) cable but you can easily get longer ones.
Can your sensors be wireless?
From our experience, wireless technology is not reliable enough to be used in escape room puzzles. With cables, you can be sure that triggering a sensor will be detected by the puzzle controller and won’t ruin the experience.
Do sensors require separate power?
Most of our sensors don’t require power unless you want an additional power supply for high current — it is needed in extensions. The Ethernet cable is included with every sensor and has to be connected to the Universal puzzle controller to work. Then, connect the controller to a power supply.
Ready to Take the Helm?
Add the Steering Wheel sensor to your cart and let players spin their way to success.
Add to Cart














Reviews
There are no reviews yet.