Touch Sensor
Turn any wall, desk, or prop into a touch-triggered puzzle — hands, metal objects, and even liquids set it off, with zero visible hardware.




See It in Action
Watch how to set up and use the Touch sensor step by step
Short Videos
How It All Connects
See how our products work together to create a complete escape room puzzle
Puzzle Ready!
Complete Setup
Your escape room puzzle is good to go
Touch Sensor Features

Works Like Magic
Touching something that doesn’t look like an interactive element of the game always excites players. They won’t expect that touching a wall or putting a hand on a desk is part of a puzzle — but when they try it, they’ll be amazed.
Add sound effects via the Ultimate Universal puzzle controller to create an unforgettable experience.

Body Parts, Metal Objects & Liquids
The name suggests using a body part to trigger it, but you can also use a metal wrench, some liquid in a glass, or even a pair of scissors — use everyday objects in your puzzles to surprise your players.
Whenever the sensor detects a human body, a metal object, or liquid, it becomes triggered and the yellow diodes on its Ethernet ports light up.

Automatic Calibration & Easy Installation
Don’t worry about searching for the correct detection range — the Touch sensor calibrates automatically when you power up the Ultimate Universal puzzle controller it is connected to.
Mounting holes make it easy to fix the sensor to virtually any non-metal surface (up to 20 mm thick, tested on plywood). Prefer to fine-tune the sensitivity yourself? Check out the Hands and Body sensor.

Add an Indication Light or Output
The Touch sensor supports an optional indication output that can provide visual feedback when the sensor is triggered. Connect a small LED or indicator to the feedback connector to show players that their action was detected — the yellow diodes on the Ethernet ports already light up on every trigger.
The maximum load of the feedback connector is 150 mA. If you need to connect something with a higher current load, add an external power supply — then the maximum load increases to 2A.
Monostable & Bistable Mode
The Touch sensor supports two operating modes — choose the one that fits your puzzle design
Monostable Mode (Pulse)
In monostable mode, the sensor is triggered only while it is being touched and returns to its default state the moment the touch ends. This is the default mode — and the one required for the Simon Says and Whack-a-Mole game modes below.
Best for: real-time touch puzzles, game modes 6 & 7, and scenarios where the sensor should reset on its own.
Bistable Mode (Toggle)
In bistable mode, the sensor remains triggered after you touch it and stops when it’s touched again. Think of it like a light switch — one touch turns it on, another turns it off.
Best for: toggle-based puzzles, activating props that should stay on, and multi-step sequences where state matters.

Switching Between Modes
Move the small black jumper on the sensor board. If the jumper connects the two pins on the left marked “PULSE”, the sensor is monostable; the two pins on the right marked “TOGGLE” make it bistable.
Both modes are demonstrated in the short videos above.
See how to switch modes →Whack-a-Mole & Simon Says Compatible
In monostable mode the Touch sensor deactivates the moment players stop touching it — exactly what Modes 6 and 7 require

How to Enable Mode 6 & 7
In Simon Says (Mode 6) and Whack-a-Mole (Mode 7), players touch the sensor whose feedback diode indicates it’s next. These modes usually use a feedback diode to show which sensor to trigger.
If you use such a diode, use a screwdriver to move the wire from the “IN” slot to the “OUT” slot, then tighten it securely.
For Mode 6 and Mode 7, set the Touch sensor to monostable mode (see the section above).
Included Items
Touch SensorWith an Ethernet port
1-Meter Ethernet CableFor connecting to the puzzle controller
Inspiration for Your Room
Creative ways to use the Touch sensor in escape room puzzles
The Magic Wall
Hide the sensor behind a painted symbol on the wall. When a player presses a palm against the symbol, hidden LED lights come alive and a secret compartment clicks open.
The Alchemist’s Shelf
Mount the sensor under a shelf spot marked with a rune. Only placing a filled glass or flask on the rune — liquid included — triggers the next stage of the ritual.
The Mechanic’s Desk
Hide the sensor under a workbench outline. Players must lay the correct metal tool on the marked spot to power up the old machine and reveal the next clue.
The Séance Table
Place the sensor under a séance table. When a player rests a hand on the marked spot, eerie sounds play through the Ultimate Universal puzzle controller and the candles flicker on.
Technical Specifications

Package Contents
- ✓ Touch sensor with an Ethernet port
- ✓ 1-meter Ethernet cable
| Trigger | Human body, metal objects, liquids |
|---|---|
| Sensing Range | Up to 20 mm (tested through plywood) |
| Dimensions | 67 × 49 × 20 mm |
| Calibration | Automatic (at controller power-up) |
| Current Consumption | 20 mA |
| Connection | Ethernet cable (RJ45) to puzzle controller |
| Feedback Output | Max 150 mA (2A with external power) |
| Sensor Type | Monostable / Bistable (jumper-selectable) |
Touch Sensor Manual
Find step-by-step instructions, mode-switching details, troubleshooting tips, and advanced configuration options in our comprehensive knowledge base.
Open Manual →How to Set It Up

Connect the Touch sensor to the Ultimate Universal puzzle controller via the included Ethernet cable.

Connect the Ultimate Universal puzzle controller to a power supply.

Turn the sensor upside down. This is the side that detects touch.

Fix the sensor to a non-metal surface within the game setup (surface thickness up to 20 mm, tested on plywood).

Unplug the power cable from the Ultimate Universal puzzle controller and plug it in again so the Touch sensor can auto-calibrate.

From now on, whenever the sensor detects a human body, metal object, or liquid, it becomes triggered and the yellow diodes on its Ethernet ports light up.
Frequently Asked Questions
What can trigger the Touch sensor?
The human body (a hand, a fingertip), metal objects (a wrench, scissors, a key), and liquids (for example, water in a glass). Anything conductive placed close enough to the sensing side will trigger it — even through up to 20 mm of non-metal surface.
Do I need to calibrate the sensor myself?
No — the Touch sensor calibrates automatically every time you power up the Ultimate Universal puzzle controller it is connected to. If you move the sensor to a new surface, simply unplug the controller’s power and plug it back in. If you prefer manual sensitivity control, the Hands and Body sensor is the alternative.
How do sensors work?
Sensors detect what players do. When a player performs a specific action, the sensor identifies that action and becomes triggered. When all the sensors connected to a puzzle controller are triggered correctly (in a specific way and/or order), the puzzle is solved and the output sets activate.
How many sensors can one puzzle have?
Our hardware lets you attach up to 14 sensors to one puzzle controller (one puzzle). You can use many sensors of the same kind, or make each of them of a different kind — it all depends on your puzzle idea.
What is the length of the cable that connects a sensor to a puzzle controller?
Each sensor is connected to the Universal puzzle controller via an Ethernet cable. We provide a 1 m (3.28 ft) cable but you can easily get longer ones.
Can your sensors be wireless?
From our experience, wireless technology is not reliable enough to be used in escape room puzzles. With cables, you can be sure that triggering a sensor will be detected by the puzzle controller and won’t ruin the experience.
Do sensors require separate power?
Most of our sensors don’t require power unless you want an additional power supply for high current — it is needed in extensions. The Ethernet cable is included with every sensor and has to be connected to the Universal puzzle controller to work. Then, connect the controller to a power supply.
Ready to Add a Touch of Magic?
Add the Touch sensor to your cart and turn ordinary walls, desks, and props into astonishing touch-triggered puzzles.
Add to Cart
























jeanine –
Work well with many different concepts.
Rooms of Magic (verified owner) –
It is hard to overstate how many different ways you can use this very reliable sensor to create memorable immersive puzzles. We use it in numerous puzzles, because we find the touch sensor so much more rewarding than magnet sensors. People love interacting with objects and this sensor allows for immediate feedback and very creative ideas.