Valve Sensor
Oh, how the valves have turned! Each full turn lights another diode — players must stop exactly on the right one to solve the puzzle.




See It in Action
Watch the Valve sensor light up its diodes turn by turn
Short Videos
How It All Connects
See how our products work together to create a complete escape room puzzle
Puzzle Ready!
Complete Setup
Your escape room puzzle is good to go
Valve Sensor Features

A Progress Bar Players Turn by Hand
The Valve sensor has 25 diodes. Each full turn to the right (clockwise) lights up diodes one by one, while turns to the left (counterclockwise) turn them off.
Once the correct diode is reached, the sensor becomes triggered. It works like a progress bar that has to end up in exactly the right place — not a diode under or beyond.
The LED lights chain can also be hidden behind frosted glass to simulate bars that need to be filled up to a point.

Teach Any Target Diode
Setting the winning position takes seconds: turn the valve until the diode you want players to reach lights up, then hold the teaching button until it blinks once.
Every time the correct diode is reached — but not exceeded — the sensor becomes triggered and the yellow diodes on its Ethernet ports light up.

One Device — 5 Different Sensors
The Valve sensor runs on our universal encoder hardware. By moving a small jumper to a different pair of pins and reconnecting the power supply, you can turn it into a completely different sensor:
Direction sensor · Steering Wheel sensor · Safecracker sensor · Handwheel sensor
For the Valve sensor, the jumper sits on MODE 4. Note that the Valve and Handwheel modes require the LED light chain and an additional power supply (both included with this product).

The LED Chain Is the Indicator
Unlike most sensors, the Valve sensor comes with its own visual feedback built in: the 25-diode LED lights chain shows players their progress with every turn, so they always know the valve is doing something.
On top of that, the sensor supports an optional feedback output for an extra indication light or device. The maximum load of the feedback connector is 150 mA — with an external power supply, it increases to 2A.
Whack-a-Mole & Simon Says
The Valve sensor is not compatible with these two game modes
Simon Says (Mode 6) and Whack-a-Mole (Mode 7) require monostable sensors — ones that trigger for a moment and release as soon as players stop interacting with them. The Valve sensor works differently: it is a progress-based sensor whose valve physically stays where players leave it, so the trigger doesn’t clear by itself.
If you want to build Simon Says or Whack-a-Mole games, pair your controller with sensors like the LED Button sensor, Foot Button sensor, or Hands and Body sensor instead.
Included Items
Valve Sensor in a Wooden CaseEasily mounted to a wall, with a wooden wheel hub assembly + an optional 3D-printed valve add-on
LED Lights Chain25 diodes — your puzzle’s progress bar
1-Meter Ethernet CableFor connecting to the puzzle controller
Power SupplyWith an EU/US/UK plug, depending on the shipping address
Inspiration for Your Room
Creative ways to use the Valve sensor in escape room puzzles
Clock Face Riddle
Arrange several valves with their diodes around clock faces. Players must determine the correct “hours” to light up by solving riddles related to time.
Frosted Glass Gauges
Hide the LED chain behind frosted glass to simulate laboratory gauge bars that must be filled up to exactly the right level — overfill them and the mixture is ruined.
Submarine Pressure Control
Players must set the boat’s pressure valves to the exact safe level before the dive — a diode too low or too high and the alarm sounds instead of the hatch opening.
Steampunk Boiler Room
Combine several Valve sensors on a boiler wall. Each valve controls one “steam line” — only the correct combination of levels powers up the old machine and reveals the next clue.
Technical Specifications

Package Contents
- ✓ Valve sensor in a wooden case that can be easily mounted to a wall
- ✓ Wooden wheel hub assembly
- ✓ LED lights chain (25 diodes)
- ✓ 1-meter Ethernet cable
- ✓ Power supply with an EU/US/UK plug, depending on the shipping address
- ✓ An optional 3D-printed add-on — valve
The Valve sensor requires the LED light chain and its own power supply to work properly — both are included in the package.
| Progress Diodes | 25 (one per full turn) |
|---|---|
| Wheel Hub Dimensions | 85 × 85 × 12 mm (approx. 3.3 × 3.3 × 0.5 in) |
| Valve Add-on Dimensions | 105 × 105 × 10 mm (approx. 4.1 × 4.1 × 0.4 in) |
| Sensor Weight | 0.7 kg (1.5 lbs) |
| Encoder Mode | MODE 4 (jumper position) |
| Connection | Ethernet cable (RJ45) to puzzle controller |
| Feedback Output | Max 150 mA (2A with external power) |
| Hardware Version | HW7SW7 |
Valve Sensor Manual
Find step-by-step instructions, wiring diagrams, troubleshooting tips, and the full 5-in-1 encoder documentation in our comprehensive knowledge base.
Open Manual →How to Set It Up

Connect the Valve sensor to the Ultimate Universal puzzle controller via an included Ethernet cable. Make sure the small jumper is on the correct pins, set to MODE 4.

Connect both the Ultimate Universal puzzle controller and the sensor to individual power supplies.

Attach any add-on (ours or a custom one via the wooden hub assembly), and check if the LED light chain is connected to the green screw terminal.

Turn the valve to the right (clockwise) to choose the diode players have to reach — one full turn lights up one diode. Confirm it by holding the teaching button until it blinks once.

Every time the correct diode is reached (but not exceeded), the sensor becomes triggered, and the yellow diodes on its Ethernet ports light up.
Frequently Asked Questions
Does the Valve sensor need its own power supply?
Yes — unlike most of our sensors, the Valve sensor requires its own power supply to run the LED lights chain. The power supply is included in the package with an EU/US/UK plug matching your shipping address.
Can I attach my own wheel or valve instead of the included add-on?
Yes. The wooden wheel hub assembly lets you mount the included 3D-printed valve or any custom add-on that fits your room’s theme — a ship’s wheel, an industrial crank, or anything you build yourself.
How do players know they have reached the correct diode?
The LED chain shows progress with every turn. When the correct diode is reached (but not exceeded), the sensor becomes triggered and the yellow diodes on its Ethernet ports light up — and whatever output sets you connected to the puzzle controller activate.
How do sensors work?
Sensors detect what players do. When a player performs a specific action, the sensor identifies that action and becomes triggered. When all the sensors connected to a puzzle controller are triggered correctly (in a specific way and/or order), the puzzle is solved and the output sets activate.
How many sensors can one puzzle have?
Our hardware lets you attach up to 14 sensors to one puzzle controller (one puzzle). You can use many sensors of the same kind, or make each of them of a different kind — it all depends on your puzzle idea.
What is the length of the cable that connects a sensor to a puzzle controller?
Each sensor is connected to the Universal puzzle controller via an Ethernet cable. We provide a 1 m (3.28 ft) cable but you can easily get longer ones.
Can your sensors be wireless?
From our experience, wireless technology is not reliable enough to be used in escape room puzzles. With cables, you can be sure that triggering a sensor will be detected by the puzzle controller and won’t ruin the experience.
Ready to Turn Up the Challenge?
Add the Valve sensor to your cart and give your players a progress bar they can feel in their hands.
Add to Cart















Reviews
There are no reviews yet.