Wires Box Sensor
Connect the right wires to defuse the bomb — or start the machine. 16 slots, 40 wires, endless wiring puzzles.




See It in Action
Watch how to set up and use the Wires Box sensor step by step
Short Videos
How It All Connects
See how our products work together to create a complete escape room puzzle
Puzzle Ready!
Complete Setup
Your escape room puzzle is good to go
Wires Box Sensor Features

Electrician, Spy or Bomb Squad Technician
Do you wish to feel like an electrician, a spy or a bomb squad technician? Cutting or connecting the right wires sounds like a great idea for a puzzle? Choose the Wires Box sensor and design any wiring puzzle you can come up with.
16 slots (8 on each side) and 40 colorful wires give you complete freedom — from a single dramatic red-or-blue choice to a full engineer’s switchboard.

Way More Than Bomb Puzzles
The Wires Box sensor lets you make multiple puzzles. Besides the bomb-based ones, you can attach nails to the wires and make players connect them with a metal chain, or attach jacks and ports to the wires and prepare a steampunk-themed machine.
Anything conductive can close the circuit — that’s the whole trick. Our Cables and Hooks add-on extends it even further with themed connectors.

Teach It Any Winning Setup
Connect the wires the way the puzzle should be solved, hold the teaching button for 1 second, and that exact setup becomes the winning combination — confirmed by the red status diode. Re-teach it any time your room changes.
It’s such a flexible base that our Phone Central sensor — a full telephone switchboard prop — is built on this very box.

Diodes Show the Progress
The Wires Box sensor has feedback built right in: red diodes behind the slots on one side light up for every correctly handled connection, and the status diode confirms the taught setup. Players always know they’re getting closer.
You can also connect an additional indication light or output to the feedback connector. Its maximum load is 150 mA — with an external power supply, up to 2A.
Whack-a-Mole & Simon Says
The Wires Box sensor is not compatible with these two game modes
Simon Says (Mode 6) and Whack-a-Mole (Mode 7) need monostable sensors — ones that stop being triggered the moment players stop interacting with them. Because connected wires physically stay in place, the Wires Box sensor’s trigger doesn’t clear by itself, so it can’t play these rapid trigger-and-release games.
Looking for sensors for Simon Says or Whack-a-Mole? Try the LED Button, Foot Button, or Hands and Body sensors instead.
See full list of compatible sensors →Included Items
Wires Box Controller16 wire slots (8 per side), red status diode, teaching button, Ethernet port
40 Colorful WiresReady to cut, connect and re-teach
1-Meter Ethernet CableFor connecting to the puzzle controller
Inspiration for Your Room
Creative ways to use the Wires Box sensor in escape room puzzles
Defuse the Bomb
The classic. Players find the wiring diagram hidden across the room, then must connect (or avoid!) the right wires before the timer hits zero.
Chain the Circuit
Attach nails to the wires and hide them around a prop. Players close the circuit by connecting the nails with a metal chain — no screwdriver needed mid-game.
Steampunk Switchboard
Attach jacks and ports to the wires and build a steampunk-themed machine. Players patch the right connections to bring the contraption to life.
Spy Wire-Tap
Players play counter-intelligence: rewire an intercepted junction box so the enemy transmission routes through their listening post — the taught setup is the correct tap.
Technical Specifications

Package Contents
- ✓ Black controller box with 16 slots for wires (8 on each side), red diode, teaching button, and an Ethernet port
- ✓ 1-meter Ethernet cable
- ✓ 40 colorful wires
| Wire Slots | 16 (8 on each side) |
|---|---|
| Dimensions | 230 × 190 × 70 mm |
| Winning Setup | Teachable (hold teaching button 1 second) |
| Status Indication | Red status diode + per-slot diodes |
| Connection | Ethernet cable (RJ45) to puzzle controller |
| Feedback Output | Max 150 mA (2A with external power) |
Wires Box Sensor Manual
Find step-by-step instructions, wiring examples, troubleshooting tips, and advanced configuration options in our comprehensive knowledge base.
Open Manual →How to Set It Up

Prepare the Wires Box sensor and some wires (you can use the included ones).

Use a screwdriver to put the wires into the slots on both sides.

Connect the wires so every wire on one side connects to another wire on the other side.

Connect the Wires Box sensor to the Ultimate Universal puzzle controller via the included Ethernet cable. Connect the controller to a power supply.

Confirm the wires setup by holding the teaching button for 1 second. From now on, this particular setup triggers the sensor and the red status diode confirms it.

Check the red diodes behind the slots on one side. If every slot is connected (or not) according to the correct setup and all the diodes are lit, the sensor is triggered.
Frequently Asked Questions
What can I attach to the wires?
Anything conductive that closes the circuit — the included colorful wires, nails connected with a metal chain, jacks and ports for a switchboard look, or the connectors from our Cables and Hooks add-on. If it conducts, it can be part of the puzzle.
How do I change the winning wire setup?
Connect the wires the new way and hold the teaching button for 1 second. The red status diode confirms the new setup — from then on, that exact combination triggers the sensor. You can re-teach it as often as you like.
How do sensors work?
Sensors detect what players do. When a player performs a specific action, the sensor identifies that action and becomes triggered. When all the sensors connected to a puzzle controller are triggered correctly (in a specific way and/or order), the puzzle is solved and the output sets activate.
How many sensors can one puzzle have?
Our hardware lets you attach up to 14 sensors to one puzzle controller (one puzzle). You can use many sensors of the same kind, or make each of them of a different kind — it all depends on your puzzle idea.
What is the length of the cable that connects a sensor to a puzzle controller?
Each sensor is connected to the Universal puzzle controller via an Ethernet cable. We provide a 1 m (3.28 ft) cable but you can easily get longer ones.
Can your sensors be wireless?
From our experience, wireless technology is not reliable enough to be used in escape room puzzles. With cables, you can be sure that triggering a sensor will be detected by the puzzle controller and won’t ruin the experience.
Do sensors require separate power?
Most of our sensors don’t require power unless you want an additional power supply for high current — it is needed in extensions. The Ethernet cable is included with every sensor and has to be connected to the Universal puzzle controller to work. Then, connect the controller to a power supply.
Ready to Wire Up Your Next Puzzle?
Add the Wires Box sensor to your cart and let your players cut, connect, and defuse their way to victory.
Add to Cart














Reviews
There are no reviews yet.